ATEN Technology CE250a User Manual download pdf (Page 11)

Chapter 1. Introduction

Requirements

Console

 A VGA, SVGA, or Multisync monitor capable of the highest resolution

that you will be using on any computer in the installation

 A PS/2 keyboard

 A PS/2 mouse

Note: 1. If you connect a DDC type monitor to the Local Unit, the monitor that

connects to the Remote Unit must be able to support the highest video

resolution that the DDC monitor can provide.

2. You must use the same brand and model of mouse on both the local

and remote units.

Computers

The following equipment must be installed on each computer that is to be

connected to the system:

 A VGA, SVGA, or Multisync card

 A 6-pin mini-DIN mouse port

 A 6-pin mini-DIN keyboard port

Cables

 For optimum signal integrity we strongly recommend that you use the

high-quality Custom KVM cable provided with this package. The shape

and function of the KVM connectors on the switch and the cable have

been modified so that only KVM cables designed to work with this KVM

switch can be used.

 Cat 5 cable is the minimum required to connect the local and remote

CE250

A units.

ce250a.book Page 3 Friday, October 9, 2009 5:17 PM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 30 31

No comments

ATEN Technology CE250a User Manual Page 11