ATEN Technology CE800b User Manual download pdf (Page 25)

Chapter 3

Operation

Basic Operation

Operating Modes

The CE800B USB KVM Extender utilizes three operating modes: Auto, Local,

and Remote, as described in the table below:

Mode Selection

The Operating Mode Selection Switch, located on each unit’s front panel,

controls the operating mode of the CE800

B USB KVM Extender system.

Pressing the switch toggles the operating mode as follows:

When the system is in Local Mode, the Remote unit’s selection switch is

inactive. Pressing it has no effect – the Remote operator cannot take over

control. The Remote selection switch only becomes active after the Local

selection switch is pressed to put the system back into Auto Mode.

Mode Description

Local Only the local console has complete access. Although operators

at both consoles can see the display, only the local console

operator has keyboard and mouse access and control.

Remote Only the remote console has complete access. Although

operators at both consoles can see the display, only the remote

console operator has keyboard and mouse access and control.

Auto Both consoles have access but neither has complete input

control. The first console to create keyboard or mouse input

takes control. Following this, if there is no input for five seconds,

the CE800

B goes back to Auto Mode.

Switch Action

Local (CE800BL) Selection

Switch

Toggles between Auto and Local. In Local Mode, only the

local console has keyboard and mouse access and

control of the computer (or computers via KVM switch).

Remote (CE800

BR)

Selection Switch

Toggles between Auto and Remote. In Remote Mode,

only the remote console has keyboard and mouse

access and control of the computer (or computers via

KVM switch).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 53 54

No comments

ATEN Technology CE800b User Manual Page 25