ATEN Technology KM0832 User Manual download pdf (Page 128)

KM0832 User Manual

118

SADM CONFIGURATION

Only the super administrator can view and control the functions under this

menu.

(continues on next page)

Setting Function

SET

NETWORK

This function allows administrators to configure the network settings for

the KM0832 on the Local Area Network (LAN). A submenu appears

with the following choices: HTTP PORT, HTTPS PORT, AUTOMATIC IP

ADDRESS, and IP ADDRESS SETTING.

To set the HTTP port:

1. From the list, select HTTP PORT.

2. Key in the port (typically port 80), and press [Enter].

To set the HTTPS port:

1. From the list, select HTTPS PORT.

2. Key in the port (typically port 443), and press [Enter].

To enable dynamic IP addressing with a DHCP server:

1. From the list, select AUTOMATIC IP ADDRESS.

2. Press [Y] to enable; or, press [N] to disable.

Note: The default is enabled. If you disable this feature, then you

should manually configure the IP settings.

To manually configure the IP settings:

1. From the list, select IP ADDRESS SETTING. A list appears with the

following choices: IP ADDRESS, SUBNET MASK, GATEWAY, PRI-

MARY DNS SERVER, and ALTERNATE DNS SERVER.

2. Select each choice and enter the numerical address (dotted quad

address), and then press [Enter].

Note: These settings do not apply if you enable DHCP.

SET CLOCK This function allows administrators to configure the date and time for

the KM0832. A submenu appears with the following choices: SET

DATE and SET TIME.

To set the date and time:

1. From the list, select SET DATE. In the field that appears, enter the

date in YYYY-MM-DD format, and then press [Enter].

2. From the list, select SET TIME. In the field that appears, enter the

time in HH:MM:SS format, and then press [Enter].

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 166 167

No comments

ATEN Technology KM0832 User Manual Page 128