ATEN Technology ALTUSEN KH0116 User Manual download pdf (Page 50)

KH0116 User Manual

Selecting the Active Port

Each Computer Port is assigned a Port ID (see Port ID Numbering, p. 17). You

can directly access any computer on the installation with a Hotkey combination

that specifies the Port ID of the Computer Port that the computer is connected

to. The steps involved are:

1. Invoke Hotkey Mode (see p. 35).

2. Key in the Port ID

The Port ID numbers display on the Command Line as you key them in. If

you make a mistake, use [Backspace] to erase the wrong number.

3. Press [Enter]

After you press [Enter], the KVM focus switches to the designated

computer and you automatically exit Hotkey Mode.

Auto Scanning

Auto Scan automatically switches among all the active Computer Ports that are

accessible to the currently logged on User at regular intervals, so that he can

monitor their activity automatically. (See Scan/Skip Mode of the OSD F3 SET

function, p. 24 for information regarding accessible ports).

Setting the Scan Interval

The amount of time Auto Scan dwells on each port is set with the Scan

Duration setting of the OSD F3 SET function (see p. 24). You can change the

scan interval before activating Hotkey Auto Scanning, if you wish, with the

following Hotkey combination:

1. Invoke Hotkey Mode (see p. 35).

2. Key in [T] [n]

Where [T] is the letter T, and [n] is a number from 1-255 that represents

the number of seconds for the dwell time.

The letter T and the numbers display on the Command Line as you key

them in. If you make a mistake, use [Backspace] to erase the wrong

number.

3. Press [Enter]

After you press [Enter], you automatically exit Hotkey Mode, and are

ready to invoke Auto Scanning.

kh0116-v2.book Page 36 Wednesday, March 22, 2006 4:53 PM

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 69 70

No comments

ATEN Technology ALTUSEN KH0116 User Manual Page 50