ATEN Technology ATEN KH98 User Manual download pdf (Page 52)

KH98 User Manual

Selecting the Active Port

Each Computer Port is assigned a Port ID (see Port ID Numbering, p. 16). You

can directly access any computer on the installation with a Hotkey combination

that specifies the Port ID of the Computer Port that the computer is connected

to. The steps involved are:

1. Invoke Hotkey Mode (see p. 37).

2. Key in the Port ID

The Port ID numbers display on the Command Line as you key them in. If

you make a mistake, use [Backspace] to erase the wrong number.

3. Press [Enter]

After you press [Enter], the KVM focus switches to the designated

computer and you automatically exit Hotkey Mode.

Port Key In Examples:

To access a computer attached to Port 3 on a Single Stage installation, key in 3

for the Port ID, as follows:

[Num Lock] + [*] 3 [Enter]

To access a computer attached to Port 3 on a Second Stage unit that is cascaded

down from Port 2 of the First Stage, key in 2 3 for the Port ID, as follows:

[Num Lock] + [*] 2 3 [Enter]

Note: The numbers should be keyed in one at a time.

 To access a computer attached to Port 8 on a Third Stage unit that links

back to port 4 of a Second Stage unit linking back to KVM Port 6 on the

First Stage unit, key in 6 4 8 for the Port ID, as follows:

[Num Lock] + [*] 6 4 8 [Enter]

KH98.book Page 38 Thursday, April 26, 2007 5:48 PM

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 77 78

No comments

ATEN Technology ATEN KH98 User Manual Page 52