ATEN Technology KL1508A User Manual download pdf (Page 70)

KL1508A / KL1516A User Manual

(Continued from previous page.)

3. Use the firmware upgrade cable (provided with this unit), to connect a

COM port on your computer to the firmware upgrade port of your device.

Note: On a daisy chained installation, connect the cable to the first station

(master) unit. The chained stations (slaves) that are the same model

will receive the upgrade via the daisy chain cables.

4. Shut down all of the computers except those that are attached to cable

adapters that require upgrade. The cable adapters require the computers

power source to be upgraded. Do not shut down the stations on the KVM

installation that you want to upgrade.

5. From your KVM switch console, bring up the OSD (see page 33) and

select the F4ADM function.

6. Scroll down to FIRMWARE UPGRADE. Press [Enter], then press [Y] to

start the Firmware Upgrade mode (see page 43).

Note: The upgrade to the KVM Adapter Cables takes place via the Cat 5e/

6 cable that connects the adapter cable to the KVM switch, so there

is no separate firmware upgrade cable to attach.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 95 96

No comments

ATEN Technology KL1508A User Manual Page 70