ATEN Technology CS-1708 User Manual download pdf (Page 15)

Installation

Before you Begin

Single Stage Installation

Refer to the installation diagrams on the next page as you perform the following

steps. The numbers in the diagrams correspond to the steps:

1. Plug your USB keyboard, monitor, and USB mouse into the Console Ports

located on the unit’s rear panel.

2. Use KVM cable sets to connect any available CPU Port to the video and

USB ports of the computers you are connecting up.

Note: 1. Two cable sets are supplied with this package; additional sets

require a separate purchase. See the Cables section on p. 4 for

details.

2. The shape of the 15-pin CPU Port connectors has been

specifically modified so that only KVM cables designed to work

with this switch can plug in.

3. Plug the power adapter cable into the switch’s Power Jack, then plug the

power adapter into an AC power source.

This completes the single stage installation, and you can turn on the power to the

computers.

1. Make sure that power to all the devices you will be connecting up

have been turned off. You must unplug the power cords of any

computers that have the Keyboard Power On function. Otherwise,

the switch will receive power from the computer.

2. To prevent damage to your installation make sure that all devices on

the installation are properly grounded.

2004-04-27

Installation

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 55 56

No comments

ATEN Technology CS-1708 User Manual Page 15