ATEN Technology CS-1708 User Manual download pdf (Page 38)

(F4 ADM: continued)

Setting Function

RESET

STATION IDS

If you change the position of one of the Stations in the daisy chain,

the OSD settings will no longer correspond to the new situation.

This function directs the OSD to rescan the Station positions of the

entire installation and updates the OSD so that the OSD Station

information corresponds to the new physical layout.

Note: Only the Station Numbers get updated. Except for the Port

Names, all Administrator settings (such as Set Accessible Ports, Set

Quick View Ports, etc.), for all of the computers affected by the

change, have to be manually redone.

SET

OPERATING

SYSTEM

Specifies the operating platform of the computer attached to each

port. For each port, press the [Spacebar] to cycle through the

choices (PC, Sun, Mac, and SPC*). Repeat until all the ports have

been set, then press [Esc]. The default is PC.

FIRMWARE

UPGRADE

In order to upgrade the CS-1708 / CS-1716’s firmware (see p. 37),

you must first invoke Firmware Upgrade Mode with this setting.

KEYBOARD

LANGUAGE

Sets the keyboard language layout for the computer attached to

each port. Choices are: Auto, English, French, German, and

Japanese. Auto (the default), sets the keyboard language according

to the keyboard language of the computer.

* 1. PC stands for PC compatible. This is the choice that should be made for

all operating systems other than Sun and Mac.

2. If you are installing a Sun or Mac computer, before you run it for the first

time you must set the correct operating system for the port it is connected

to with this function, otherwise, it will not boot.

3. SPC stands for Special Case. For certain operating systems (such as

FSBD), you may need to choose this option if you run into startup

problems. If this occurs, please contact technical support for further

information

2004-04-27

CS-1708 / CS-1716 User Manual

32.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

No comments

ATEN Technology CS-1708 User Manual Page 38