ATEN Technology ACS1216A User Manual download pdf (Page 13)

Chapter 1. Introduction

Front View

Note: The ACS1216A is pictured above. The ACS1208A front panel is the

same as that of the ACS1216A, except that it has 8 KVM ports.

No. Component Description

1 Port LEDs

 An orange LED indicates that a computer is

connected to the corresponding port.

 A green LED indicates that the computer connected

to the corresponding port has focus.

2 Reset Button Pressing in this button performs a system reset. When

the system is reset, the ACS1208A / ACS1216A beeps,

and then the KVM port LEDs flash in succession until

the reset is completed. After the reset is completed you

can login again.

Note: This button is semi-recessed and must be

pushed with a small object, such as the end of a paper

clip or a ballpoint pen.

3 Power LED Lights (green) to indicate that the unit is receiving

power.

4 Station ID LED The ACS1208A / ACS1216A Station ID is displayed

here. If this is a Single Station installation (see page 9),

or the First Station on a daisy-chained installation (see

page 10), the switch has a Station ID of 01.

On a daisy-chained installation, the ACS1208A /

ACS1216A auto-senses its position and displays the

Station ID that corresponds to its place in the chain.

(see Port ID Numbering, page 13 for details).

2 3

POWER

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 60 61

No comments

ATEN Technology ACS1216A User Manual Page 13