ATEN Technology ACS1216A User Manual download pdf (Page 27)

Chapter 3. Hotkey Operation

Skip Mode

This feature allows you to switch between computers in order to monitor them

manually. You can dwell on a particular port for as long or as little as you like

– as opposed to Auto Scanning, which automatically switches after a fixed

interval. To invoke Skip mode, key in the following Hotkey combination:

1. Invoke Hotkey mode with the [NumLock] + [*] or [NumLock] + [-]

combination

2. Key in [Arrow]

 Where [Arrow] refers to one of the Arrow keys. After you press

[Arrow], you automatically exit Hotkey mode, and enter Skip mode

where you can switch ports as follows:

 Once you are in Skip mode, you can keep on skipping by pressing the

Arrow keys. You don't have to use the [NumLock] + [-] combination

again.

 While Skip Mode is in effect, ordinary keyboard and mouse functions

are suspended – only Skip mode compliant keystrokes can be input.

You must exit Skip mode in order to regain normal control of the

console.

3. To exit Skip mode, press [Esc] or [Spacebar].

← Skips from the current port to the first accessible port previous to it.

(See Scan/Skip Mode, page 27, for information regarding accessible

ports.)

→ Skips from the current port to the next accessible port.

↑ Skips from the current port to the last accessible port of the previous

Station.

↓ Skips from the current port to the first accessible port of the next

Station.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 60 61

No comments

ATEN Technology ACS1216A User Manual Page 27